Book Promo Banner
FBA with Bust Dart

FBA with Bust Dart

Home Page › Forums › Ask A Question › FBA with Bust Dart

Tagged: , ,

  • This topic has 1 reply, 1 voice, and was last updated 9 years ago by the_professors_assistant.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 26, 2015 at 12:08 AM #46278
    the_professors_assistant
    Keymaster

    I have to do an FBA for greater than 4″ on a top that has a side/bust dart. Can I do the sleeve increase/bodice increase using the pivot method? What happens to the bust dart? Do I extend the dart? If so, how much?

    November 30, 2015 at 4:28 PM #46391
    the_professors_assistant
    Keymaster

    Sorry, for the delay. I just got back from my Thanksgiving trip. Yup, you can do it but you might need to increase the sleeve a bit since you’re increasing the armcycle by 2″ on each side. If you watch our increase sleeve width you can see that it’s pretty easy to do. The bust dart will be lengthened by this increase. I would just extend the lines to the new side seam, but do a muslin so you can test the fit and make any adjustments as necessary.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Ask A Question’ is closed to new topics and replies.