Book Promo Banner
mistake

mistake

Home Page › Forums › Ask A Question › mistake

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 26, 2013 at 9:11 AM #19908
    the_professors_assistant
    Keymaster

    hi profpincushion. i made a mistake, i pin sewing pattern on the right side of the fabric for folded n double layer fabric part. i already cut out all of them out of my fabric . what should i do? thank you

    August 27, 2013 at 12:58 PM #19982
    the_professors_assistant
    Keymaster

    I’m trying to understand. So you folded your fabric with the right side of the fabric on the outside and then cut out your pieces? If that’s the case, then you’re still ok. Normally, you cut with the wrong side out but it’s not going to hurt anything if you did it the other way around. The only time you might run into an issue is if you only needed 1 piece of something and now it’s just the backwards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Ask A Question’ is closed to new topics and replies.