Book Promo Banner
Sizing up a whole pattern

Sizing up a whole pattern

Home Page › Forums › Ask A Question › Sizing up a whole pattern

  • This topic has 1 reply, 1 voice, and was last updated 11 years ago by the_professors_assistant.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 3, 2013 at 8:00 AM #22152
    the_professors_assistant
    Keymaster

    I am a pattern size 30W (52-46-60 measurements) and want to know how to size up entire patterns that may go only up to size 22 or 24. Some of them I would need to size up as much as 6-8″. Would that be too much and distort the whole pattern if I did that, or would there be a good way to go about it? Thank you!

    November 4, 2013 at 6:44 PM #22189
    the_professors_assistant
    Keymaster

    Hi there, what you want is called pattern grading. Unfortunately, we don’t have a tutorial on this yet. (I hope to have one in the future) Here is a good article on Threads about it so I hope it helps: http://www.threadsmagazine.com/item/4368/making-sense-of-pattern-grading/page/all

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Ask A Question’ is closed to new topics and replies.